Type A, C and 3 Way Warning Light

Product ID: RSPBL3LD(XX)

Price: $29.92

Lens Colors

Quantity:

« Previous | Next »

Description
About Barricade Warning Lights
Mounting Brackets Support Guidance
Literature

Type A, C and 3 Way Warning Light

The Type A, C and 3 Way Warning Light is a heavy duty light that meets MUTCD requirements.

PRODUCT ID: RSPBL3LD(XX)
Color (XX): (YY) Yellow Lens /Yellow Body | (RY) Red Lens /Yellow Body
Options: Flasher or steady burn
Type A, C and 3-way, 3volt high efficiency lights.
Features rugged and durable co-polymer case with breakaway internal candle.
Servicing is made easy with a snap-lock case and vertically positioned batteries.
The "D"� cell batteries simply drop into to the light base and the case is ready to be snap-lock closed.
The case will remain closed and secure during the rough handling normally encountered during transportation and service work.
The impact absorbing breakaway candle reduces internal damage.
Bright and dependable LED's coupled with power efficient, reliable moisture proof circuitry, provide trouble-free operation.
Light may be operated using 2 or 4 "D"� cell batteries.
Type A and C lights comply with current ITE purchase specification referenced in the Federal MUTCD.

About Barricade Warning Lights

According to the MUTCD, a series of sequential flashing warning lights may be placed on channelizing devices to increase driver detection. Warning lights shall have a minimum mounting height of 30 inches to the bottom of the lens. Refer to the MUTCD for more information.

Type A (Low-Intensity Flashing) Warning Lights may be mounted on channelizing devices and are used to warn road users during nighttime hours that they are approaching or proceeding in a potentially hazardous area.
Type B (High-Intensity Flashing) Warning Lights are used to warn road users during both daylight and nighttime hours that they are approaching a potentially hazardous area. Type B warning lights are designed to operate 24 hours per day and may be mounted on advance warning signs or on independent supports.
Type C (Steady-Burn) Warning Lights may be used during nighttime hours to delineate the edge of the traveled way. When used to delineate a curve, Type C warning lights should only be used on devices on the outside of the curve, and not on the inside of the curve.

Mounting Brackets Support Guidance

Mounting Brackets allow proper alignment of warning light to meet I.T.E. and MUTCD requirements and have positive stops to eliminate rotation!

The MUTCD states when flashing warning lights are used in conjunction with signs, they shall not block the sign face.
According to MUTCD guidelines, warning lights shall be mounted on signs or channelizing devices in a manner that, if hit by an errant vehicle, they will not be likely to penetrate the windshield.
I.T.E. Specifications require the lights to be mounted with base of the light perpendicular to the ground line.

Construction Work Zone Products view pdf

Product Reviews

No Reviews For This Product.