Custom Products Corporation Online Traffic Signs and Safety Products Store
Type I and II CPC Barricades (Steel Legs & Aluminum Boards)

Type I and II CPC Barricades (Steel Legs & Aluminum Boards)

Price: $58.90
 Add to cart Checkout
  • Description
  • About Barricades
  • Barricade Video
  • About Barricade Stripes
  • Stripes Video
  • Literature

Type I and II CPC Barricades (Steel Legs & Aluminum Boards)

This Economy All Metal Barricade is one of the most durable yet economical designs in the market today because the aluminum panels can be straightened and re-used.

  • Barricade Type (T): (1) Type I | (2) Type II
  • Barricade Reflective Panel Specifications:
    Type 1 Panel Sizes (TB):
    24" x 8" Reflective Top Panel | 24" x 5" Blank Bottom Panel
    (36) 36" x 8" Reflective Top Panel | 36" x 5" Blank Bottom Panel
    Type 2 Panel Sizes (TB):
    24" x 8" Reflective Top & Bottom Panel
    (36) 36" x 8" Reflective Top & Bottom Panel
    Reflective Sides: Outside panels on both sides of barricade as specified by type options selected.
    Stripe Colors: Orange/White
    Stripe Direction: Side 1 - Right Stripes | Side 2 - Left Stripes
    Stripe Width: 24" Wide - 4" Stripes | 36" Wide - 6" Stripes
  • Reflective Sheeting (R): (E) Engineer Grade | (H) High Intensity Prismatic | (D) Diamond Grade
  • Ideal for public works projects.
  • 14 gauge, galvanized 45" steel leg barricade with aluminum boards.
  • Boards and legs can be replaced, legs can be repaired.
  • If the barricade is too damaged to repair then the parts can be salvaged and used to repair other barricades. This is a feature not available on plastic barricades!
  • Metal barricades have aluminum panels which can be straightened and re-used after being hit.
  • Barricades come fully assembled.
  • Leg hinge hole accepts 1/2" light mounting bolt.
  • Call customer service at 1-800-367-1492 to order stenciling, other stripe colors and configurations and replacement parts.

A barricade is a portable or fixed device having from one to three rails with appropriate marking and is used to control road users by closing, restricting, or delineating all or a portion of the right-of-way. Refer to the MUTCD for more information.

  • Type 1 Barricades may be used on conventional roads or urban streets.
  • Type 2 Barricades should be used on freeways and expressways or other high-speed roadways.
  • Type 3 Barricades should be used to close or partially close a road.
  • Red/White Stripes: When barricades are used to warn road users of the end of a roadway, the stripes shall be red and white.
  • Sign Placement: Signs mounted on barricades and barricade/sign combinations shall be crashworthy. Refer to MUTCD Section 6F.03.10

The MUTCD (Manual for Traffic Control Devices) specifies sizes and color combos for Barricade Boards and Vertical Panels. Refer to the MUTCD for more information.

  • 4" Stripes: boards/panels that are 8-12" x 24" and smaller shall have 4" Stripes
  • 6" Stripes: boards/panels that are 8-12" x 36" and larger shall have 6" Stripes
  • Red/White Stripes: STOP or Prohibition (Permanent)
  • Orange/White Stripes: indicate Temporary Traffic Control
  • NOTE: Barricade sheeting can NOT be rotated for use as both "left" and "right". There is a common misconception that "ALL" striped goods can be used for both "right" and "left" options by simply rotating them 180 degrees. Shown Below: Rotate the "right" object marker -or- barricade board and it remains a "right".
Barricade Stripes

Construction Work Zone Products Guide

Construction Work Zone Products view pdf


Product Reviews

No Reviews For This Product.

CPC Signs Footer Menu
CPC Signs has over 100,000 items that you need, when you need them!

Custom Products Corporation © 2022 | HOME