Type III: Volcano Base & Telespar Breakaway System Kit #3
The Type III: Volcano Base & Telespar Breakaway System Kit #3 has everything you need for a Type III barricade except for the barricade boards.
-
PRODUCT ID: RSPB3ZBUS2S
-
Kit #3 features Volcano Bases with Telespar Posts
-
Material: 14 gauge galvanized steel square post breakaway system
-
Post Size: 1.75" Uprights
-
Kit #3 Includes:
(2) Two - Volcano Bases
(2) Two - 5ft long Telespar® Uprights
(1) One - Hardware Kit - Board to Square Post Upright
(2) Two - Quick Release Lock Pins
-
Choose Barricade Boards (Sold Separately from Breakaway Kit)
-
Telespar Breakaway Kit #3 allows quick removal of uprights from volcano bases for short term or permanent placement.
-
Easy to assemble and replace parts, if necessary.
-
The TelesparĀ® Square Posts shape provides superior wind load capabilities and inhibits warping. Galvanized, hot rolled high carbon steel. Pre-punched mounting 7/16ā? holes. Upright accepts a flashing barricade light.
-
Meets MUTCD Standards.
-
NOTE: Barricade Boards, Sold Separately.
A barricade is a portable or fixed device having from one to three rails with appropriate marking and is used to control road users by closing, restricting, or delineating all or a portion of the right-of-way. Refer to the MUTCD for more information.
-
Type 1 Barricades may be used on conventional roads or urban streets.
-
Type 2 Barricades should be used on freeways and expressways or other high-speed roadways.
-
Type 3 Barricades should be used to close or partially close a road.
-
Red/White Stripes: When barricades are used to warn road users of the end of a roadway, the stripes shall be red and white.
-
Sign Placement: Signs mounted on barricades and barricade/sign combinations shall be crashworthy.
The MUTCD (Manual for Traffic Control Devices) specifies sizes and color combos for Barricade Boards and Vertical Panels. Refer to the MUTCD for more information.
-
4" Stripes: boards/panels that are 8-12" x 24" and smaller shall have 4" Stripes
-
6" Stripes: boards/panels that are 8-12" x 36" and larger shall have 6" Stripes
-
Red/White Stripes: STOP or Prohibition (Permanent)
-
Orange/White Stripes: indicate Temporary Traffic Control
-
NOTE: Barricade sheeting can NOT be rotated for use as both "left" and "right". There is a common misconception that "ALL" striped goods can be used for both "right" and "left" options by simply rotating them 180 degrees. Shown Below: Rotate the "right" object marker -or- barricade board and it remains a "right".